Pages: [1]
« previous next »
Print
Author Topic: 1986 Rinker V190 Mercruiser Alpha One - Water Supply hose question  (Read 679 times)
caribbeanjoe
Landlubber
*
Offline Offline

Posts: 6
« on: August 07, 2010, 03:46:56 PM »
Hello,

I have a pinhole in my water supply hose, when I take off the upper outdrive unit, will I need to disconnect the bellows to get to the water supply hose? ( and replace all the bellows')

and are the outdrive stands worth buying?


thank you,

Mike.
Logged
floater180
Swabbie
***
Offline Offline

Location: manhattan, il.
Boat: 2005 rinker captiva 212 xr1 w/ 5.7 mpi
Posts: 55
« Reply #1 on: August 07, 2010, 05:13:38 PM »
i would say , yes! because the bellows are held in place by clamps and glue. and anyway at that old of boat they may not have been replaced and new is always better than " it still works" old, as long as you're in there.
Logged
caribbeanjoe
Landlubber
*
Offline Offline

Posts: 6
« Reply #2 on: August 08, 2010, 12:37:15 AM »
should i get parts from my local boat store, or is iboats.com/online parts stores just as good?

thanks,

Mike.
Logged
alswagg
Vice Admiral
*******
Offline Offline

Location: Syracuse Indiana
Boat: Supra Beast
Boat name: Beast
Posts: 1858
« Reply #3 on: August 09, 2010, 09:23:16 AM »
The pivot housing will have to be removed also.  I would invest in a bellows kit.  U joint, shift, exhaust and water hose.  Al
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc