Overtons
Pages: [1]
« previous next »
Print
Author Topic: "Extra" pieces on the bimini?  (Read 420 times)
Joynt Venture
Landlubber
*
Offline Offline

Location: Peoria, IL
Boat: 2006 Rinker 360
Boat name: Joynt Venture
Posts: 9


2006 Rinker 360
« on: May 17, 2010, 11:44:38 AM »
Still learning our way through our 2006 - 360.  Over the winter we found three pieces of canvas for the top.  Two have velcro running length wize, both are approx. 24" long and 4 inches wide.  The other has two female female taps for the twist lock and velcro on the opposite side.  This one is slightly smaller.  We are stumped at to what these are for??????????
Logged
alswagg
Vice Admiral
*******
Offline Offline

Location: Syracuse Indiana
Boat: Supra Beast
Boat name: Beast
Posts: 2026
« Reply #1 on: May 17, 2010, 02:23:13 PM »
Two go on the binimi frame to resist abrasion from the rails,  the one with  the tabs goes on the rail when folded up on against the arch.  IF you look on top of the arch you should see two twist locks, this is where the tabs attach.  I hope this helps  Al
Logged
Joynt Venture
Landlubber
*
Offline Offline

Location: Peoria, IL
Boat: 2006 Rinker 360
Boat name: Joynt Venture
Posts: 9


2006 Rinker 360
« Reply #2 on: May 17, 2010, 04:41:22 PM »
Thanks for letting me know.  Do the two go on the frame where it touches the isinglass?
Logged
alswagg
Vice Admiral
*******
Offline Offline

Location: Syracuse Indiana
Boat: Supra Beast
Boat name: Beast
Posts: 2026
« Reply #3 on: May 17, 2010, 06:14:43 PM »
yes,  Al
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc