Pages: [1]
« previous next »
Print
Author Topic: Cleaning Your Engine?  (Read 909 times)
Shalemari
Newbie
*
Offline Offline

Location: Valrico, FL
Boat: '06 Rinker 232 BR
Boat name: Shalemari
Posts: 1
« on: September 21, 2008, 03:19:08 PM »
Howdy!  Anyone have suggestions/product info for cleaning my engine?  Is it OK to spray engine degreaser and then lightly hose it down?  Not very mechanically inclined but learning ...
Logged
zieggy
Captain
*****
Offline Offline

Location: Port Austin, MI "Tip of the Thumb"
Boat: 2005 Rinker 342 FV
Boat name: Sharon Ann
Posts: 688
« Reply #1 on: September 22, 2008, 12:54:44 PM »
Assuming your going to do this on land.

Degreasing  should be OK, however make sure your bilge area is cleaned up well before going back into the water.

Suggestion put a couple of oil absorbers in your bilge to catch any grease, oil, solvents.
Logged
Zieggy - Michigan, Tip of the Thumb
2005 342 FV "Sharon Ann"
Member US Power Squadron & US Coast Guard Auxillary
Black_Diamond
Rear Admiral
******
Offline Offline

Location: Lake Michigan - Holland, MI
Boat: 2003 Rinker 342
Boat name: Black Diamond
Posts: 1473


Ski hard - Play hard


WWW
« Reply #2 on: September 26, 2008, 10:05:16 PM »
I'm always wary of degreasing engines unless they are really bad and you are searching for oil leaks.  The degreaser and associated water can get into wiring harnesses and cause more trouble than it's worth.

Your other problem with being in a boat is you'll get the oil/water all over the bilge causing a larger mess and EPA issues if you discharge overboard.  Even on land, you'll have a mess.  Just my .02.
Logged
2003 342 "Black Diamond"
Talon
Head Moron
Administrator
Fleet Admiral
*****
Offline Offline

Location: Charlotte, NC USA
Boat name: Never Aloan Again, Again
Posts: 3532



WWW
« Reply #3 on: September 29, 2008, 12:33:39 PM »
I tend to agree. I generally just wipe my down with dry cloths to keep the worst of the grease off.
Logged
merwin10
Vice Admiral
*******
Offline Offline

Location: Onset Massachusetts
Posts: 1663
« Reply #4 on: October 16, 2008, 12:50:31 PM »
My 2 ยข worth! If your engine is dirty enough to need to clean it you must ask why??????? If dirt and dust has collected there must be oil, If there is oil you have a leak that needs addressing! Fix the leak first, then clean with dry cloths! the fines for pumping oil water is NOT worth the trouble!

Mike - bat
Logged
Best part of boating are the People you meet ......
Greg
Captain
*****
Offline Offline

Location: Central Florida
Boat: 2006 Rinker 342
Boat name: Sol Searchin'
Posts: 703
« Reply #5 on: October 20, 2008, 08:47:34 AM »
I agree with Merwin.  If it is "bad enough" to need degreasing there may be an issue.

Greg
Logged
'06 Rinker 342 
" Sol Searchin' "
Home Port: Daytona Beach
Capt Ron
Vice Admiral
*******
Offline Offline

Location: Aurora ON Canada
Boat: 07 Rinker 320EC 5.0L B3
Boat name: Y Knot
Posts: 2065
« Reply #6 on: October 22, 2008, 01:58:54 PM »
I used WD40 and a soft cloth to keep my engines looking brand new. WD40 was developed by NASA for a cleaner and not a lubricant. Most people think it as a lubricant when it's cleaning properties are amazing.
Cheers,
Ron
 thumbsup
Logged
Y Knot tie up and have a drink
Black_Diamond
Rear Admiral
******
Offline Offline

Location: Lake Michigan - Holland, MI
Boat: 2003 Rinker 342
Boat name: Black Diamond
Posts: 1473


Ski hard - Play hard


WWW
« Reply #7 on: October 22, 2008, 08:12:48 PM »
automotive brake cleaner is a great degreaser/cleaner too.  It evaporates and leaves no residue.
Logged
2003 342 "Black Diamond"
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc