Overtons
Pages: [1]
« previous next »
Print
Author Topic: Trim Gauge for 2006 Captiva 212  (Read 396 times)
mrplow
Dock Hand
**
Offline Offline

Location: Alberta
Posts: 27
« on: July 25, 2008, 02:46:23 AM »
Does anyone know how to adjust the trim gauge.  With the leg fully down it reads below the bottom trim line and with the leg fully raised it is at the quarter mark.  

Any advise would be great..  thanks
Logged
PartsMan
Vice Admiral
*******
Offline Offline

Location: Fairport Harbor, Ohio
Boat: 2003 270 FV
Boat name: Time Out
Posts: 1976
« Reply #1 on: July 25, 2008, 08:37:40 AM »
I don't know what drive you have. On the Alpha One there are two screws on the trim sensors, which are located on the drive. Loosen the two screws and adjust.
Logged
mrplow
Dock Hand
**
Offline Offline

Location: Alberta
Posts: 27
« Reply #2 on: July 25, 2008, 12:01:48 PM »
Sorry i should have mentioned that.  I have the Volvo SX drive.  where is the trim sensor located on the leg or inside with the hydralics..
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc