Pages: [1]
« previous next »
Print
Author Topic: Thru hull exhaust  (Read 1400 times)
mikiaviator
Newbie
*
Offline Offline

Posts: 3
« on: April 13, 2008, 11:48:07 AM »
Hello,

I have a 2003 Rinker 232 Captiva Cuddy. I am planning to install thru hull exhaust system. I am very pleasant if you can help me and send the photos of your exhaust, pipe lines exhaust side tips and so on.
Logged
Proper Channels
Dock Hand
**
Offline Offline

Posts: 10
« Reply #1 on: April 23, 2008, 01:02:57 AM »
Miki,

I apologize for the quality of the shot but it shows the thru hull tips on the factory installed Corsa exhaust on my 2000 Captiva BR.  I will send some "under the hood shots" next week.

[attachment deleted by admin]
Logged
Proper Channels
2000 Captiva 232 BR
350 MAG - B3
mikiaviator
Newbie
*
Offline Offline

Posts: 3
« Reply #2 on: June 04, 2008, 07:33:07 AM »
Thank for the photo, but if you have a possibility to take the photos of pipe lines, I really appreciate it!

Thanks in advance!

Regards,

Miki
Logged
morrisdl
Swabbie
***
Offline Offline

Location: Rochester, NY
Boat: 2004 Rinker 232 (almost R2)
Boat name: More Sun
Posts: 76
« Reply #3 on: June 26, 2008, 03:14:22 PM »
I am curious why would want to do this to your boat?  I am sure you are a very pleasant person, but more and more places are banning this type of exhaust.
Logged
2004 232BR with some mods:Fusion CD500 Stereo w/transom remote, Fire extinguisher, OEM Wakeboard Tower, Duel Batteries w/switch, Keyless ignition, High-5 blade SS prop, Perfect Pass Cruise Control,Popup LED bow light, 8" sub, (4) OEM Tower speakers.
boboh
Swabbie
***
Offline Offline

Location: East Central Ohio
Boat: 1999 Rinker 212
Boat name: Ali-K
Posts: 110
« Reply #4 on: June 27, 2008, 07:30:15 AM »
If your looking to make a lot of noise then go for it.  If your looking for performance improvement, especially with a small block, I believe you will be disapointed.  There has been other discussion on here of this you may want to do a search and check those out.
Logged
earl1z19
Ensign
****
Offline Offline

Location: N41.566502 W82.824965 Port Clinton Ohio
Boat: 07 Rinker 246 cc
Posts: 323
« Reply #5 on: June 27, 2008, 08:20:42 AM »
I have this on my 246 and it is more for fun than performance.
As far as those places banning these exhaust, I bet their loaded with blue hair boaters. Besides, there are always other places to boat.
You do need to use these with common sense and not around the docks.
Logged
07' 246 CC

GO RINKER!!!!
morrisdl
Swabbie
***
Offline Offline

Location: Rochester, NY
Boat: 2004 Rinker 232 (almost R2)
Boat name: More Sun
Posts: 76
« Reply #6 on: June 27, 2008, 10:17:31 AM »
States with noise ordnances:
http://www.corsaperf.com/mlaws.htm
Logged
2004 232BR with some mods:Fusion CD500 Stereo w/transom remote, Fire extinguisher, OEM Wakeboard Tower, Duel Batteries w/switch, Keyless ignition, High-5 blade SS prop, Perfect Pass Cruise Control,Popup LED bow light, 8" sub, (4) OEM Tower speakers.
mikiaviator
Newbie
*
Offline Offline

Posts: 3
« Reply #7 on: July 05, 2008, 04:52:36 PM »
Only reason is the sound, not performance. I will keep the existing sterndrive exhaust pipes, use the y-pipes what makes possible to electrically control flaps between thru hull or sterndrive.

Only what I need, photos of similar installation.

Regards,

Miki
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc