Overtons
Pages: [1]
« previous next »
Print
Author Topic: Bow Scuff Plate for 246 BR  (Read 408 times)
franchrm
Dock Hand
**
Offline Offline

Posts: 11
« on: December 12, 2011, 09:04:00 PM »
Has anyone found an aftermarket bow scuff plate for a 246 BR?  I have a 2008 that did not come with one.
Any ideas would be appreciated.
Thanks!
Logged
pepmyster
Rear Admiral
******
Offline Offline

Location: Mascouche, Quebec,Canada
Boat: Rinker 280 ec 2008
Boat name: Chances Are
Posts: 1161


I has to be in the water!!


WWW
« Reply #1 on: December 12, 2011, 10:03:26 PM »
Maybe check with West Marine?
Logged
jmeyers278
Swabbie
***
Offline Offline

Location: West Alton, MO
Boat: 01 270 FV
Boat name: Irish Wake
Posts: 123


I boat therefore I am
« Reply #2 on: January 29, 2012, 07:51:59 PM »
I made my own out of stainless.  I made a pattern out of paper and took it to a metal shop and had them cut it out of stainless.  It was thin enough to bend it a little to fit the bow.  I installed it with double sided tape from 3m.....been on there 3 years and no problems.  I'll post a pic
Logged
jmeyers278
Swabbie
***
Offline Offline

Location: West Alton, MO
Boat: 01 270 FV
Boat name: Irish Wake
Posts: 123


I boat therefore I am
« Reply #3 on: January 29, 2012, 08:04:07 PM »
Logged
franchrm
Dock Hand
**
Offline Offline

Posts: 11
« Reply #4 on: February 04, 2012, 11:29:05 AM »
Looks good.  I will look into that.  Is that a 77 Towncar next to your boat?  My family had one of them.  I believe that was/is the biggest production car made in America.  Ours had a 460 4bbl.
Logged
jmeyers278
Swabbie
***
Offline Offline

Location: West Alton, MO
Boat: 01 270 FV
Boat name: Irish Wake
Posts: 123


I boat therefore I am
« Reply #5 on: February 04, 2012, 11:35:15 AM »
79 towncar with a 400
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc