Pages: [1]
« previous next »
Print
Author Topic: Wrench for windless  (Read 431 times)
Brite Eyes
Dock Hand
**
Offline Offline

Location: Wildwood, NJ
Boat: Rinker 350 w/Axius
Boat name: Brite Eyes
Posts: 49
« on: November 20, 2011, 05:16:28 PM »
Does anyone know where to purchase a wrench for the windless on the 2008 350?  I believe it appears to be a square.  When we used our anchor last time, it got stuck or started to go off track so it was pulled up manually because we couldn't find the wrench.  Any suggestions or recommendations as we intend to use it alot more next season. 
Logged
JohnDiStefano
Swabbie
***
Offline Offline

Location: Bayville, NJ
Boat: 2008 300EC
Boat name: Brite Eyes
Posts: 93
« Reply #1 on: November 20, 2011, 07:33:47 PM »
Yeah...here too.  Was looking for it on the boat we bought too!!  :)
Logged
Rinker342
Vice Admiral
*******
Offline Offline

Location: Chesapeake Bay / Annapolis, MD
Boat: 2005 Rinker FV 342
Boat name: Crews Control
Posts: 1663
« Reply #2 on: November 21, 2011, 09:52:35 AM »
A tool should be in your "boat pack" from Rinker.  If you have misplaced it, check with the windlass manufacturer.
Logged
Doug
"Crews Control"
2005 Rinker 342
Chesapeake Bay
alswagg
Vice Admiral
*******
Online Online

Location: Syracuse Indiana
Boat: Supra Beast
Boat name: Beast
Posts: 2024
« Reply #3 on: November 21, 2011, 10:39:33 AM »
Look for a SST handle,  about 12" long   Al
Logged
Crown Me
Landlubber
*
Offline Offline

Boat: 2008 Rinker 350EC
Boat name: Crown Me
Posts: 5
« Reply #4 on: January 08, 2012, 12:53:45 PM »
Hello to all,

Just use a standard or long 1/2" drive ratchet.  Lewmar did this as most folks have a 1/2" drive ratchet.
Logged
drifter
Ensign
****
Offline Offline

Location: Annapolis, Maryland
Boat: 2007 300 EC
Boat name: Santosa
Posts: 333
« Reply #5 on: January 09, 2012, 03:39:25 PM »
Quote from: Crown Me on January 08, 2012, 12:53:45 PM
Hello to all,

Just use a standard or long 1/2" drive ratchet.  Lewmar did this as most folks have a 1/2" drive ratchet.

+1! works well.
Logged
2007 300 EC
Annapolis, MD
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc