Pages: [1]
« previous next »
Print
Author Topic: Valve on holding tank discharge with no macerator?  (Read 200 times)
TorchRedStang
Dock Hand
**
Offline Offline

Location: Lake Dallas, TX
Boat: '03 FV 270
Boat name: Chillaxin
Posts: 24
« on: October 18, 2011, 12:25:59 AM »
Long story short.. previous boat owner installed a macerator on the output of the holding tank. The output goes from the tank to the macerator and straight to the thru hull "waste" labeled fitting where you get the tank pumped out. The macerator is dead and the boat shouldn't have one in the first place so I am removing it. Should there be a valve of some kind between the waste tank and thru hull fitting? This is on a '03 FV 270 but I would imagine any boat without a macerator would be setup the same way.

Thank you!
Logged
Sea Dumpster
Ensign
****
Offline Offline

Location: Indianapolis, IN
Boat: Rinker FV270
Boat name: Sea Dumpster
Posts: 224
« Reply #1 on: October 18, 2011, 11:43:45 AM »
If you are referring to the line that goes from the bottom of the tank to the above the waterline discharge outlet, there is no valve.

Paul
Logged
Sea Dumpster
FV 270
Indpls., IN
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc