Pages: [1]
Print
Author Topic: 1994 280 Fiesta Vee Gauges needed  (Read 263 times)
cafsman
Landlubber
*
Offline Offline

Location: Near Seneca IL
Boat: 1994 Rinker 280 Fiesta Vee
Boat name: Dragon Slayer
Posts: 7


I'd rather be hunting or boating!


WWW
« on: August 26, 2011, 06:17:20 PM »

Looking for the original Teleflex gauges that came on the 1994 Fiesta Vee. They are white face, black needle, and backlit in red. In order of importance I need a sync gauge, tachometer gauge, oil gauge and voltage gauge. Any or all would be great! Best to contact me off forum as it goes to my smartphone at ruger1v@prodigy.net.

Thank YOU!
Logged
AlexisandChad
Captain
*****
Offline Offline

Location: Grosse Ile, MI
Boat: Rinker FV 260
Boat name: Bella Blu
Posts: 622


« Reply #1 on: August 27, 2011, 12:33:58 AM »

First off, the site has been the target of a few spammer and phishers. Putting your email address on an open post is asking for trouble.   naughty naughty

As for the gauge, look on the back of the gauge and see if you can find the serial number and then contact Teleflex via their website and see if they have any left.  I did the same for my 260 but could only find the volt meter, and trim gauge.  Both were very expensive so I just opted to replace all my gauges with aftermarket ones.  I would still check to see if you can get replacement originals but I think you will be looking at a new set.  My .02
Logged

1993 Rinker 260 Fiesta Vee "Bella Blu"
5.7 Merc. Bravo 2
cafsman
Landlubber
*
Offline Offline

Location: Near Seneca IL
Boat: 1994 Rinker 280 Fiesta Vee
Boat name: Dragon Slayer
Posts: 7


I'd rather be hunting or boating!


WWW
« Reply #2 on: August 28, 2011, 11:29:06 AM »

Thanks for the info on email and on serial numbers. I have done several google searches and found a few dealers in old gauges and one thinks he may have what I need. I am not sure that the existing gauges are bad or perhaps there are some electronics issues. The starboard tach will show double the rpm's of port for a while, then it matches. The starboard oil gauge fluctuates wildly when exceeding 2400 rpm's.
Logged
Rinker Boat Owners
   

 Logged
Pages: [1]
Print
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc