Pages: [1]
« previous next »
Print
Author Topic: Propellers  (Read 417 times)
Addilescent
Landlubber
*
Offline Offline

Posts: 5
« on: July 18, 2010, 04:31:17 PM »
Advice on prop? I have a 2007 Captiva 226 with a 5.0L mpi.  I currently have a Vengeance 21P prop on it.  It does good at top end, but takes forever to level out.  Anyone try a prop that pops skiers out of the water? 
Logged
DaleM
Rear Admiral
******
Offline Offline

Location: Blue Island, Illinois
Boat: 2000 Rinker 270 Fiesta Vee
Boat name: Open Seas'n
Posts: 1271
« Reply #1 on: July 18, 2010, 09:28:50 PM »
Is the 21" aluminum?  If so I'd go to either a 19" aluminum or 17" stainless steel.  Many have also gone to a 4 blade 19" stainless. 
Logged
Armed and ready for the revolution.  If no one wants to lead......follow me!!!
Addilescent
Landlubber
*
Offline Offline

Posts: 5
« Reply #2 on: July 21, 2010, 06:39:17 PM »
It is stainless.  I tried a couple of 19', but couldn't tell a difference.  I saw that someone else had installed trim tabs with good luck.  Have you ever tried them?
Logged
DaleM
Rear Admiral
******
Offline Offline

Location: Blue Island, Illinois
Boat: 2000 Rinker 270 Fiesta Vee
Boat name: Open Seas'n
Posts: 1271
« Reply #3 on: July 21, 2010, 11:51:41 PM »
Only have tabs on my 270, not the 232.  A 4 blade 19" should get you a better holeshot.
Logged
Armed and ready for the revolution.  If no one wants to lead......follow me!!!
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc