Overtons
Pages: [1]
« previous next »
Print
Author Topic: 1991 Captiva 206 wont go above 2500 rpm while moving  (Read 216 times)
JustinF
Newbie
*
Offline Offline

Posts: 1
« on: August 03, 2011, 12:09:38 PM »
Hey guys,

I have a 1991 Rinker captiva with a just rebuilt motor.  I can not get the boat up to plane consitently.  It seems when in water I can get up to 2500 rpm but if i then try full throttle it stall a littel then acts like it will climb but doesnt.  It looks like the prop might have a couple of small dings.   Should I just replace the prop and start there or is it a fuel mixture proplem.

any help is appreciated.

Justin
Logged
pepmyster
Rear Admiral
******
Offline Offline

Location: Mascouche, Quebec,Canada
Boat: Rinker 280 ec 2008
Boat name: Chances Are
Posts: 1155


I has to be in the water!!


WWW
« Reply #1 on: August 03, 2011, 12:32:33 PM »
Small dings shouldn`t affect it to get on plane, it would cause vibration. Too many reasons why you can`t get the rpm you need. Recheck all that has been done and keep us informed roll eyes
Logged
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc