Pages: [1]
« previous next »
Print
Author Topic: Stainless Steel Cup holders look great in my 1998 Rinker 272 CC  (Read 730 times)
chrisawol
Dock Hand
**
Offline Offline

Location: Detroit, MI
Boat: Rinker 272 Captiva Cuddy
Posts: 12
« on: July 01, 2011, 10:14:22 AM »
I found these Stainless Steel Cup-holders online and they look great in my 1998 Rinker 272 Captiva Cuddy

Just an FYI if any one else is looking to replace theirs, I got the deep 3-18" ones swapped them out pretty easy.

Just pried up old one with screw driver , cleaned up old caulk and installed the new ones that already have double sided tape or you you can use a semi permanent caulk if you would like.

http://www.bakesonline.com/detail.aspx?ID=643

I bought 9 with shipping was $80  thumbsup

I will post a pic later.
Logged
Christopher Ahwal
stlouisramsfan
Swabbie
***
Offline Offline

Boat: Rinker 192 Captiva
Posts: 52
« Reply #1 on: July 02, 2011, 04:57:28 AM »
I like these, I will upgrade 2, thanks
Logged
berlin76
Dock Hand
**
Online Online

Posts: 24
« Reply #2 on: July 10, 2011, 04:32:59 PM »
i just ordered some yesterday. thanks for the info
Logged
raybo3
Fleet Admiral
********
Offline Offline

Location: East Boston Ma.
Boat: 2002 342 Fiesta Vee
Boat name: RAYBO III
Posts: 3050



WWW
« Reply #3 on: July 11, 2011, 06:22:04 AM »
The S/S cup holders look nice but be carefull they get real hot in the sun......
Logged
Ray*
berlin76
Dock Hand
**
Online Online

Posts: 24
« Reply #4 on: July 11, 2011, 10:26:19 PM »
guess ill have to keep a fresh beer in there at all times shades
Logged
Gene
Captain
*****
Offline Offline

Location: Littleton Colorado
Boat: 1997 Rinker 232 Captiva CC
Posts: 503
« Reply #5 on: September 08, 2011, 03:34:18 PM »
Very nice, may have to upgrade mine. Hopefully will have a new to me 2000 272 502 mpi soon. How do you like your 272, what is you top speed and what is your engine?
Logged
1997 232 Cuddy 454 Merc Bravo 3
Rinker Boat Owners
   
 Logged
Pages: [1]
Print
« previous next »
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc