Overtons
Pages: 1 [2]
Print
Author Topic: Swim Platrorm LED's  (Read 2065 times)
gn86randy
Dock Hand
**
Offline Offline

Location: Virginia Beach
Boat name: Turbo's Ride
Posts: 48



« Reply #15 on: June 13, 2011, 07:40:31 AM »

It's the hose bib for a raw water pump. I use it to clean the dog hair and sand out of the dinghy and off the swim platform.

That would come in handy on mine, thanks
Logged
politby
Ensign
****
Offline Offline

Location: N59.4728, E18.4164
Boat: 2002 342 FV
Boat name: Exenia
Posts: 375



« Reply #16 on: June 15, 2011, 08:03:37 AM »


Send a pic of your rocker switch install if you can...you have given me inspiration.



The stereo remote is not mounted quite straight - I used the same mounting holes as the old one and they were crooked.  sad

Logged
AlexisandChad
Captain
*****
Offline Offline

Location: Grosse Ile, MI
Boat: Rinker FV 260
Boat name: Bella Blu
Posts: 622


« Reply #17 on: June 15, 2011, 08:41:18 AM »

That stereo remote switch would drive me insane.  Ever think of mounting a trim piece that would line up level with the holes then mount the remote to make everything look level?  See, insane bang head bang head bang head
Logged

1993 Rinker 260 Fiesta Vee "Bella Blu"
5.7 Merc. Bravo 2
raybo3
Fleet Admiral
********
Offline Offline

Location: East Boston Ma.
Boat: 2002 342 Fiesta Vee
Boat name: RAYBO III
Posts: 3050



WWW
« Reply #18 on: June 15, 2011, 09:15:53 AM »

Why not elong gate the holes and mount the remote straight???????
Logged

Ray*
politby
Ensign
****
Offline Offline

Location: N59.4728, E18.4164
Boat: 2002 342 FV
Boat name: Exenia
Posts: 375



« Reply #19 on: June 15, 2011, 09:22:48 AM »

Why not elong gate the holes and mount the remote straight???????


Because I have had enough  of tinkering for this year and I want to go boating scratch head
Logged
Vuja De
Ensign
****
Offline Offline

Location: Utah
Boat name: Vuja De
Posts: 322


« Reply #20 on: June 15, 2011, 01:46:36 PM »

Why not elong gate the holes and mount the remote straight???????


Because I have had enough  of tinkering for this year and I want to go boating scratch head

AMEN TO THAT..   clapping
Logged
mightys4
Ensign
****
Offline Offline

Location: Albany, NY
Boat: 2002 270 FV
Posts: 156



« Reply #21 on: June 16, 2011, 10:27:23 PM »

Had the same issue with mine, replaced the factory remote and the holes didn't line up!  UGH! 

And yes, its driving me nuts enough to build a plate.  bang head
Logged
mightys4
Ensign
****
Offline Offline

Location: Albany, NY
Boat: 2002 270 FV
Posts: 156



« Reply #22 on: June 16, 2011, 10:29:01 PM »

Oh, and to avoid the hi-jack, I REALLY like those swim platform LED's!  Might keep the ducks off my platform!
Logged
ruwallydog
Ensign
****
Offline Offline

Location: Scottsdale, AZ
Boat: 2001 Rinker 340
Boat name: Top Ramen
Posts: 186



« Reply #23 on: June 16, 2011, 11:13:58 PM »

P-O,

Thanks so much....the visual really helps. As far as the remotes go....at least yours work. The previous owner changed out the head unit and the existing kenwood remotes don't work. Bought the new ones but have not yet summoned the courage to take apart the headliner in the cabin to run the new lines. So as far as I am concerned turn up the volume, pass me a beer, and let's go boating.  thumbsup

Looks like I will finally splash in AZ on the 8th of July, but the consolation is I should be able to use the boat nearly year round. Just turned in my contract for a 45' covered slip on Lake Roosevelt just east of Phoenix. Please let me know if you ever get out this way.

Best!

-kurt
Logged
Gene
Captain
*****
Offline Offline

Location: Littleton Colorado
Boat: 1997 Rinker 232 Captiva CC
Posts: 503



« Reply #24 on: June 20, 2011, 01:17:31 AM »

New LED's added for added safety at raft ups

http://img43.imageshack.us/img43/1986/imag0165qh.jpg
what kind of lights are those, the cockpit lights on my 232 have broken lenses and I want to replace them with some LEDS, got a website or model number?
Logged

1997 232 Cuddy 454 Merc Bravo 3
Corral42
Swabbie
***
Offline Offline

Location: Bear, DE
Boat: 2005 Rinker Fiesta Vee 320
Boat name: DarLin
Posts: 94



« Reply #25 on: June 21, 2011, 06:52:41 AM »

Quote
what kind of lights are those, the cockpit lights on my 232 have broken lenses and I want to replace them with some LEDS, got a website or model number?


http://lumiteclighting.com/courtesyexuma.html
Logged
puttin
Swabbie
***
Offline Offline

Location: Rio Vista, Ca.
Boat: 2004 Rinker 232 Captiva Cuddy
Posts: 52



« Reply #26 on: July 10, 2011, 11:42:04 AM »

raybo3,

I would like to know more about liquid lite....sounds like a great idea!
Logged
puttin
Swabbie
***
Offline Offline

Location: Rio Vista, Ca.
Boat: 2004 Rinker 232 Captiva Cuddy
Posts: 52



« Reply #27 on: July 10, 2011, 11:48:54 AM »

I found it...

http://www.tojoseabelow.com/about.html
Logged
Rinker Boat Owners
   

 Logged
Pages: 1 [2]
Print
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc